Transportation and Hoisting of Yacht or Big Rib Boat

The transportation and hoisting of yacht or big rib boat is a very important link, and it is also the link with the most accidents. Moreover, there are many major events that cannot be ignored.

Most foreign yachts are lifted using a crane, which is safe and convenient

The best approach is to use a crane in both manufacturing and usage locations, which is both safe and convenient.

In China, the lifting of yacht or big rib boat is generally carried out using a car crane, with the largest one weighing over 200 tons. The lifting equipment usually uses wide slings, and the lifting method should pay attention to the following points:

1. Manufacturers or sellers must indicate the position of the sling on the side of the big rib boat

2. Choose large car cranes as much as possible, with a maximum lifting capacity of 3-5 times the weight of the yacht; Require the car crane to have weight display and limit warning functions;

3. The sling can only be wider. It is best to use horizontal suspension rods that are the same width as the big aluminum rib boat or yacht.

4. During the lifting process, there can only be one commander, and there must not be multiple commanders;

5. Attach a rope to the bow and stern of the suspended yacht or aluminum rib boat to control its inertial oscillation in the air;

6. After launching, the sling should be withdrawn from the bow of yacht or big rib boat.